Evolusion - Dominator SHAFT .165 ID - .003 - 12pk

$127.50

The Dominator by Evolusion Arrows is a .165 ID (4.2mm) target shaft that will keep you ahead of the competition.

It is a premium pure carbon arrow shaft designed for the target and field archer - available at a price tag that will make you smile.

Don't let the cost of the Dominator fool you. Its specs easily surpass other shafts in the same price point - which leads us to ask: "Why are the other brands so expensive?"

The Dominator is available in two straightness tolerances: 

  • .003 - Shafts Only - for archers who want the best accuracy the Dominator can offer.
  • .005 - Pre-made Arrows Only - for short draw-length or budget-minded archers (arrows are in a separate listing).

Both grades are class leaders for straightness and minimal spine deviation.

SPECIFICATIONS:
Straightness:  .003 (this is the MAXIMUM run-out for a dozen shafts, not the average).
Grain Weight Variance on Mean (per dozen shafts):  +/- 1 grain
Shaft Length:  32" (measured to the nock throat).
Maximum Spine Variance on Mean (per dozen shafts):  +/- .006"

SPINE
GPI
Internal Diameter (inch)
Outer Diameter (inch)
350 9.7 .165 .2410
400 8.7 .165 .2340
500 7.7 .165 .2280
600 7.0 .165 .2245
700 6.3 .165 .2190
800 5.8 .165 .2145
900 5.0 .165 .2100
1000 4.3 .165 .2060
1100 4.8 .165 TBA
1300 4.9 .165 .2080

 

INCLUDED COMPONENTS:

  • EVO-M (Micro) Nock - Large Throat:  6.7 grains (spines 340 - 700)
  • EVO-M (Micro) Nock - Small Throat:  6.4 grains (spines 800 - 1300)

Colours: Black, Red, Yellow, Green, Orange, Pink and White.

OPTIONAL COMPONENTS:

  • Target Point - S/S Break-Off 120 - 80 grain
Size 1 - 300 spine, Size 2 - 350 to 600 spine, Size 3 - 700 to 1300 spine.
  • .165 ID Pin Bushing:  Size 1 - 11.5 grains, Size 2 - 11.3 grains, Size 3 - 11.2 grains.
Size 1 - 300 to 400 spine, Size 2 - 500 to 700 spine, Size 3 - 800 to 1300 spine.
We recommend Mynock Pin Nocks for use with our Pin Bushing but all brands of pin nock will fit. Only use pin nocks with bows at 60 lb draw weight or less.

 

PLEASE NOTE! We are in the process of developing a new glue-in point for the Dominator shafts that has a different head profile to our existing point. It will have a smaller OD with a more acute angle leading to a sharp tip.

If you prefer this style of point, in the meantime the Victory VAP Target Points do fit the Dominator shaft, however they are a slightly tighter fit than the Evolusion points.

See below for the 'sizes' required for the various spines:

LARGE (.221" OD at point seat):  350 to 600 spine.
SMALL (.215" OD at point seat):  700 to 1300 spine.

Buy Victory VAP points HERE.

GET YOUR ARROW SPINE RIGHT!
Check out the Evolusion Arrows spine chart HERE.

NEVER shoot an arrow that is too weak in spine for your bow setup! Doing so will INCREASE THE RISK of arrow or equipment FAILURE and POSSIBLE SERIOUS INJURY to yourself or bystanders. Shooting any combination of bow and arrow has inherent risk BUT YOU CAN REDUCE THIS RISK by reading the Evolusion Arrows SAFETY INFORMATION PAGE and putting this advice on arrow safety into practice. 

Read Evolusion Arrows safety info HERE.

Shaft Cutting

If you would like your arrow shafts cut free of charge, please indicate your AMO arrow length* in the special instructions field in your cart BEFORE you proceed to Checkout.

*AMO Arrow Shaft Length is measured from the nock throat to the cut point - NOT the length of the carbon only. The insert and / or point is NOT included in the AMO Arrow Length.

Made for Evolusion Arrows to strict specification in China.

Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.