Evolusion - Dominator Convex Target Point


The new stainless steel target point for the Evolusion Dominator features an aggressive convex profile.

This point shape reduces target pressure on the arrow - so there is less friction between the carbon shaft and the target material.

The arrow is easier to pull, with less target residue binding to the shaft.

Point post breaks off in 10 grain increments.

Sold in 12-packs.


Material mechanical properties:
600+ mpa tensile strength.
240+ mpa yield strength.

Two seat diameters ensure perfect fit for every Dominator shaft spine:

  • Size 1 suits 350 to 600 spines. Two points available: 150-130 grain and 120-80 grain.
  • Size 2 suits 700 to 1000 spines. One point available: 100-70 grain.


We highly recommend the use AAE Epoxy Adhesive (24 hr set) for point installation. Available here.

Ensure both the point and shaft have be cleaned with isopropyl alcohol - don't skimp on the prep.

Avoid soaking the shaft in the isopropyl for an extended period of time - a small amount of isopropyl on a cotton tip is all that is required to clean the internal surface of the shaft.

Use a dry cotton tip to remove any alcohol that has not evaporated. A clean cotton rag and a little isopropyl will sufficiently clean the post of the point.

Clean both shaft and point until all residue is removed, and you won't go wrong.

Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.