Evolusion - Exceed Target Arrow

$138.50

The Evolusion Exceed™ target arrow offers excellent performance and durability for the intermediate and novice archer.

It's a .165 ID (4.2mm) micro-diameter arrow designed for target and field archery.

The pure carbon construction offers impressive strength and consistency.

Exceed™ arrows are fletched with genuine Q2i Fusion X-II 1.75" vanes and are supplied in a custom-made Evolusion box.

Inside each box is a 12-pack of stainless-steel Ballistic target points, conveniently matched to the arrows according to spine. These points have been custom-designed especially for the Exceed Arrow.

Arrows are supported by foam arrow holders within the factory box, keeping the arrows safe from damage in transit.

Exceed Arrows are sold only in matched, boxed 12-packs - not individually.
Nocks and points are included.
Nocks can be indexed for the release aid or finger shooter
.

Free shaft cutting!

    SPECIFICATIONS

    Straightness: .005" or better.

    Maximum Weight Variation (per 12 shafts): +/- 2.0 grains

    Shaft Length (uncut): 32.375" (or 32⅜") measured to the nock throat.

    Available in the following spines (and gpi):

    400 (8.7 gpi), 450 (8.2 gpi), 500 (7.7 gpi), 600 (7.0 gpi) 700 (6.3 gpi), 800 (5.8 gpi), 900 (5.0), 1000 (4.3 gpi).

    Evolusion Arrows® SPINE CHARTS can be found HERE.

    INCLUDED COMPONENTS

    • EV-M (Micro) Nock - Large Throat: 6.7 grains (spines 400 - 600)
    • EV-M (Micro) Nock - Small Throat: 6.4 grains (spines 700 - 1000)

    • Ballistic Target Point - 303 Stainless Steel Break-Off.
      Two seat diameters ensure the perfect fit for every Exceed shaft spine:
      Size 1 suits 400 to 600 spines - 120-80 grain break-off.
      Size 2 suits 700 to 1000 spines - 100-70 grain break-off.

    Here's a link to EV-M nocks also available separately.

    OPTIONAL COMPONENTS

    • Dominator Convex Target Point - Stainless Steel Break-Off

      Two seat diameters ensure the perfect fit for every Dominator shaft spine:

      Size 1 suits 350 to 600 spines. Two points available: 150-130 grain and 120-80 grain.

      Size 2 suits 700 to 1000 spines. One point available: 100-70 grain.

    • .165 ID Dominator Pin Bushing:
      Size 2 suits 400 to 500 spine, Size 3 suits 600 to 1000 spine.

    We recommend MyNock or Bohning Pin Nocks for use with the Pin Bushing but all brands of pin nock will fit. 
    Only use pin nocks with bows at 60 lb draw weight or less.

    Important information

    Please refer to the Evolusion Arrows® Spine Chart and Safety Information.
    Optional components may be shown in product photos.

    Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.