Evolusion - Pin Bushing - Dominator .165 ID - 12pk
Note! If you can add a variation of this product to cart - we have it in stock!
If you want to lose fewer arrows to rear-end impacts, then you need Pin Bushings installed in your Evolusion Dominator arrows.
Made from 7075 T6 aluminium.
Three sizes available with varied shoulder OD for a better match to the shaft diameter of each spine:
Size 1 - 300 spine (11.5 grains)
Size 2 - 350 to 600 spine (11.3 grains)
Size 3 - 700 to 1300 spine (11.2 grains)
Post Diameter: .1280" - fits all pin nocks on the market but we recommend MyNock pin nocks.
The Dominator Pin Bushing is also suitable for use with the Victory VAP shaft.
TIP: Pin bushings don't necessarily need to be glued into the shaft. Treat them as if they are part of the nock - press fit with a layer of very thin plastic between the shaft and the pin. Trim away the excess plastic. Now you have a tight-fitting pin bushing that can easily be removed should it be damaged.
We recommend using pin bushings and pin nocks to a maximum draw weight of 60 lb.
Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.