Evolusion - Pin Bushing .165 ID
If you want to lose fewer arrows to rear-end impacts, then you need Pin Bushings installed in your Evolusion Dominator and Exceed target arrows.
Made from high-strength 7075-T6 grade aluminium.
Three sizes are available with varied shoulder OD for a better match to the shaft diameter of each spine:
Size 1 - 350 spine (11.8 grains)
Size 2 - 400/ 450/ 500 spine (11.4 grains)
Size 3 - 600/ 700/ 800/ 900/ 1000 spine (11.3 grains)
The Dominator Pin Bushing is also suitable for use with the Victory VAP shaft.
Post Diameter: .1280" - fits all pin nocks on the market.
We recommend Bohning and MyNock pin nocks.
TIP: Pin bushings don't necessarily need to be glued into the shaft. Treat them as if they are part of the nock - press fit with a layer of very thin plastic between the shaft and the pin. Trim away the excess plastic. Now you have a tight-fitting pin bushing that can easily be removed should it be damaged.
We recommend using pin bushings and pin nocks to a maximum draw weight of 60 lb.
Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.