Evolusion - Tomahawk Hunting Arrow .003

The Tomahawk™ by Evolusion Arrows® is a slim diameter arrow that is engineered for accuracy and 'shot-after-shot' durability.

Note: Half-Outs are included with pre-fletched Tomahawk Arrows only.

The combination of the thick walled shaft and the heavy duty stainless steel half-out means the Tomahawk™ delivers plenty of 'punch' downrange.

The .003 or better straightness tolerance is for Australian bow hunters who need the best accuracy in a hard hitting bow-hunting arrow.

The included 55 grain Tomahawk™ S/S Half-Out allows you to build an arrow with exceptional front-of-centre (FOC).

Sold in 12-packs.

Nocks AND half-outs are included with the factory pre-fletched arrow.
Nocks can be indexed for the release aid or finger shooter.

Don't forget to buy points!

• Evolusion Xpert Field Points can be found here.
• Saunders points in 19/64 or 5/16" OD can be found here.

SPECIFICATIONS

Straightness Tolerance: .003 or better.

Weight Tolerance (factory fletched arrow) +/- 2.0 grains or better.

Arrow Length (uncut): 32.75" (or 32¾") measured to the nock throat.

Diameter: .204 ID (5.2mm ID)

Available in the following spines (and gpi):
250 (10.9 gpi), 300 (10.0 gpi), 350 (8.7 gpi).

Evolusion Arrows® SPINE CHARTS can be found HERE.

Sold in a 12-pack.

Nocks included.
Half-outs are included with these pre-fletched arrows ONLY.
Nocks can be indexed for the release aid or finger shooter.

Field points are sold separately.

INCLUDED COMPONENTS

This arrow comes factory-fletched with genuine Q2i Fusion X-II 3" vanes.

• EV-T .204 Nock: 8.5 grains (throat ID .1280")
• S/S Half-Out: 55 grains (suits a field point with 5/16" seat OD)
  Size 1 (1 groove) - 250 and 300 spine.
  Size 2 (2 groove) - 350 and 400 spine.
  

NOTE: The S/S Half-Out Adds 12 mm (.4725") to the finished length of the shaft.
It's possible to build a 33 inch Tomahawk arrow!

Evolusion Arrows® Stainless Steel, Aluminium and Brass components are designed in Australia to exacting tolerances.

OPTIONAL COMPONENTS

• ZT Outsert (2 Piece): 85 grains. (Stainless Steel/7075-T6 Aluminium)
  For 250, 275 and 300 spine only.
  
  
• Tomahawk SLIM Insert: 20-15 grains (7075-T6 Aluminium).
  
  
• .204 Stainless Steel Nock Bushing: 22 grains (a heavy-duty bushing that suits the EV-M Nock and similar .165 ID nocks by other manufacturers).
  
  
• .204 Aluminium Nock Bushing: 9 grains (a 7075-T6 ALU bushing that suits the EV-M Nock and similar .165 ID nocks by other manufacturers).
  
  
• EV-M Nock: 6.7 grains (used with the two .204 Nock Bushings).

• Evolusion ZT OUTSERTS can be found here.
  
• Evolusion Xpert Field Points can be found here.
  
• Saunders points in 19/64 or 5/16" OD can be found here.

Important information

Please read the Evolusion Arrows® Spine Chart and Safety Information.

Fletched arrow specifications are subject to change without notice.