SPECIALTY - Peep Housing ULTRA LITE - 1/8 inch

$38.00

The Ultra Lite Peep weighs only 7.5 grains bare – approximately 25% lighter than the original Super Peep housing.

The bare peep aperture is 3/16 inches.

The Ultra Lite Peep is designed to accept all of the Super Peep 1/8 inch apertures, clarifiers, and verifiers.

Available in 37 or 45 degree angles for short and long ATA bows.

Optional Apertures are available for this Peep Housing in the following diameters: 1/32, 3/64, 1/16, 3/32 and 1/8 inches.

Use of the Specialty Archery Dual Aperture Wrench (#210078) is recommended for insertion of optional apertures, verifiers, and clarifiers.

    Watch the peep tying video in the videos section on the Specialty Archery website, when you receive your peep.

    Optional Clarifiers and Verifiers are available in various optical powers, also in the above mentioned Aperture sizes.

    • Clarifiers sharpen the sight picture viewed through a scope lens.
    • Verifiers sharpen the pins within a sight housing, with no lens.
    CAUTION: High powered bows create a great amount of vibration. This may loosen verifiers, clarifiers and apertures over time.Tighten your apertures before each use. If you hear a buzzing sound, this indicates a loose aperture.

    You may use a small drop of Vibra-Tite VC 3 (Part #VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.

    Made in the USA by Specialty Archery, LLC.

    Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.