SPECIALTY - VERIFIER - for 1/8 Peep Housing

Sold out

Don't let changes in your vision compromise your ability to make the shot.

Specialty Archery has six verifiers, of varied power to fit the 1/8 inch Ultralight Peep Housing.

The verifier lens sharpens the picture so pins are easy to see.

The Verifier has a lens in it similar to the ones in your reading glasses that will allow you to see your sight pins better on your hunting sight.

The 1/8 inch aperture (viewing area 1/8 inches) is available in your choice of #4 (silver mark), #5 (purple mark), #6 (pink mark), #7 (blue mark), #8 (white mark), or #9 (orange mark) verifier.

The 1/8 inch verifier is for use in the 749-37UL, 749-37PS, 749-45UL, 749-45PS, 749-45, and 749-45H peeps. It will also fit in the 749-37L and 749-37LH peep with aid of a screw in reducer (753-3).

Ten Zone Archery has a special VERIFIER SELECTION DEVICE that will allow you to select the right Verifier for you, first time.


Specialty Archery recommends the use of the Dual Aperture Wrench (210078) for inserting the verifier into peeps.

They also recommend Lens Brite Anti Fog Lens Cleaner (Part 641) and Foam Applicator Lens Cleaners (Part 501) for cleaning the lenses.


CAUTION: High powered bows create a great amount of vibration. This may loosen verifiers, clarifiers and apertures over time.

Tighten your apertures before each use. If you hear a buzzing sound, this indicates a loose aperture.

You may use a drop of Vibra-Tite VC 3 (#VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.


Verifier packaging is sealed, and will not be opened for trial fitment of Verifiers to your Podium Peep.

Made in the USA by Specialty Archery, LLC.

Colours of actual products may vary to those displayed on your device. All text and photography is subject to copyright.